Call Now!
Superior Commercial Contracting roofing and restoration services

Does TPO Roofing Have Any Drawbacks When Used in Atlanta?

TPO roofing is a popular choice for commercial and residential buildings in Atlanta due to its durability, energy efficiency, and ease of installation. However, there are some potential drawbacks to consider when using TPO roofing in Atlanta:

TPO roofing Atlanta

  • TPO roofing can absorb a lot of heat, especially in warm climates like Atlanta. This can cause the material to expand and contract, leading to potential damage over time.
  • These types of roofs can degrade over time due exposure to UV rays. In areas like Atlanta where there is a lot of sun exposure, it’s important to choose a TPO roofing system with adequate UV protection to prevent premature aging and degradation.
  • The quality of a TPO installation can vary depending on the contractor. It’s important for your contractor to have experience working on TPO roofing systems, to ensure that the installation is done correctly.
  • If your TPO roof is not installed properly or the roof structure is not designed to slope correctly, ponding water can occur on the roof surface. This can lead to leaks and other water damage issues.
  • TPO roofing is available in limited color options compared to other roofing materials. This can make it more challenging to match the roofing to the rest of the building’s aesthetic.

It is important to talk to TPO roofing Atlanta specialists from Superior Commercial Roofing & Contracting. They will provide you with the best information about commercial roofing so you can make an informed decision when it comes to quality commercial roof installation and repairs.

Related Posts

Best Materials For Commercial Roofing In Atlanta

EPDM roofing Atlanta

Bituminous membranes are materials for waterproofing that are used quite often for commercial roofing in Atlanta. They are made of modified bitumen to which elasto-plastomer polymers are added, and they are manufactured with different finishes on the upper side (sand, aluminum foil, mineral slate, etc.)

Different uses include:

  • Preventing water infiltration through the roof
  • Restoration of flat commercial roofs
  • Waterproofing circulating or non-circulating flat roofs

Careful!

According to trusted EPDM roofing Atlanta contractors, before purchasing bituminous membranes, the complexity of the work to be performed must be taken into account, in order to choose the right membrane from the point of view of the quality-price ratio (do not to buy membranes for roads and bridges if you have to insulate the roof!).

Tips

Bituminous membranes can be put into operation at an ambient temperature between +5 degrees C and +35 degrees C.

  • The most important advantages of the membranes made from additive bitumen are the cold flexibility (up to -25 degrees Celsius) and the hot stability, between 110 and 130 degrees Celsius. These two technical characteristics differentiate additive membranes from oxidized bitumen membranes. Unfavorable weather conditions such as rain, snow or humidity of the surface to be insulated can compromise the quality of the work.
  • Keep in mind that the required materials must be 1.12 / 1.15 times larger than the measured surface, due to the longitudinal and transverse overlaps when applying the membranes, and the losses that occur at the joints.
Read More

How TPO Roofing Is Installed

TPO roofing Atlanta

TPO is one of the most modern roofing materials not only among the materials used for flat or very low-sloping roofs, but also among the membrane-type solutions and it also enjoys the highest level of popularity for commercial roofing in Atlanta. One of the features that make the option so popular is the quick and easy installation – here are some things that you should know about the process:
– Three methods available – mechanical attachments, ballasted installation and full adhesion are the three most common installation methods used by BBB approved TPO roofing Atlanta contractors. Mechanically attached TPO sheets are fastened with the help of screws and other mechanical fasteners applied at the edges of the sheets and strategically important locations. Ballasting is the process of laying out the sheets of TPO, holding it down by pouring the ballast material of choice onto the mom brain. Fully adhered TPO roofs use tar mopping or some other type of adhesive too fast and the membrane to the roofing substrate.
– The time frame – the installation of TPO roofing structures takes only a couple of days, even in the case of large roofs that feature multiple objects installed on the roof, such as chimneys, vents or the outdoor units of air conditioner appliances.

Read More

How to Find an Expert in Commercial Roofing – Atlanta Roofing Tips

Atlanta commercial roofing contractors

Atlanta is a pretty big place, and if you just moved here, finding a new roofer to help you with basic repairs and maintenance for your commercial roof can be somewhat difficult. Even if you already have a roofer who can handle some of the work, you’ll want to check to see if there are better choices out there. Some roofing contractors might offer better rates, or they could be using better technology and tools for everything from their roof inspections to their efforts in helping you replace your roof.

The most important thing to look for is a roofing company that has a license to practice commercial roofing in Atlanta. A license is not only proof that the roofer knows what they’re doing, but it also indicates that they have the knowledge and skill to keep your roof up to the highest possible standard.

Make sure you also look for signs of experience. Experienced Atlanta commercial roofing contractors will be able to recognize even some of the more uncommon damage and their insight will usually be reflected by the opinions of other roofers. If you ask online or research some of the things they told you during your roof’s inspection process, you should be able to have other roofers confirm their claims.

Read More