Best Materials For Commercial Roofing In Atlanta

EPDM roofing Atlanta

Bituminous membranes are materials for waterproofing that are used quite often for commercial roofing in Atlanta. They are made of modified bitumen to which elasto-plastomer polymers are added, and they are manufactured with different finishes on the upper side (sand, aluminum foil, mineral slate, etc.)

Different uses include:

  • Preventing water infiltration through the roof
  • Restoration of flat commercial roofs
  • Waterproofing circulating or non-circulating flat roofs

Careful!

According to trusted EPDM roofing Atlanta contractors, before purchasing bituminous membranes, the complexity of the work to be performed must be taken into account, in order to choose the right membrane from the point of view of the quality-price ratio (do not to buy membranes for roads and bridges if you have to insulate the roof!).

Tips

Bituminous membranes can be put into operation at an ambient temperature between +5 degrees C and +35 degrees C.

  • The most important advantages of the membranes made from additive bitumen are the cold flexibility (up to -25 degrees Celsius) and the hot stability, between 110 and 130 degrees Celsius. These two technical characteristics differentiate additive membranes from oxidized bitumen membranes. Unfavorable weather conditions such as rain, snow or humidity of the surface to be insulated can compromise the quality of the work.
  • Keep in mind that the required materials must be 1.12 / 1.15 times larger than the measured surface, due to the longitudinal and transverse overlaps when applying the membranes, and the losses that occur at the joints.

Related Posts

Can Experts in Commercial Roofing in Atlanta Handle Green Roofing Installation?

The benefits of green roofing installation include cost-effectiveness, tax exemption and the prolonging of the roofʼs longevity. Special tools and materials are usually required, but the end result always pays off because it entails the reduction of additional building expenses or energy bills as well as the removal of tear-offs or patch jobs.

Green roofing can lead to substantial cost savings in the long run. However, there are various weather events (including dust storms, hail and rain) that, usually, cause a lot of damage to green roofing, which is why it is important to always request an estimate before resorting to green roofing installation and/or maintenance.

commercial roofer Atlanta

According to an affordable commercial roofer Atlanta based specialist, proper installation and maintenance can extend the life of roofs belonging to large buildings if the options chosen are high quality. Finally, in order to have the best type of roofing maintenance there is, it is important to also take into consideration: the size and structure of the building, obvious safety concerns, current leaks, previous repairs and inspections.

In Atlanta, appropriate solutions for green roofing depend on system repairs, types of material and repair options made available by the roofing company. Moreover, maintenance must be performed as soon as there is visible damage on the roof including: blistering bubbles, pooling water, damaged seals, stained ceilings, dark spots on interior walls, mold, punctures, cracks or tears.

All in all, an affordable commercial roofer Atlanta experts recommend are equipped to deal with both the installation and maintenance of green roofing systems as long as all aspects of roofing are discussed with the client prior to the actual installation or restoration.

3 Flat Roofing Products You Will Need for Better Energy Efficiency

flat roofing Atlanta

The ideal roof would be 100% reflective in summer and 100% absorbent in winter, but a roof cannot change its reflective and emission properties. As a result, the overall energy efficiency of a roof must be assessed by comparing the energy saved from temperature regulation during the hot summer months with the energy consumed in the cold season.

TPO membranes – Roof systems that reflect the sun’s rays can save energy and money. They are suitable year round in warm environments, in the hot summer months, and in temperate areas. Reflective roofs are metallic or very light colored, and TPO membranes are typically white or light gray.

In addition to reducing the cooling demand for the entire building, a low roof temperature also increases the efficiency of the installed photovoltaic system. Where there is a HVAC system installed, the efficiency of transporting cold air throughout the building is also dramatically increased. According to flat roofing Atlanta experts, this leads to low energy consumption, an environmentally friendly impact.

PVC membranes can be manufactured in light gray or slate gray, so they have similar properties to TPO membranes when it comes to energy efficiency. Their advantage is better resistance to very high temperatures.

EPDM membranes are dark in color, making them suitable for cold areas with less sunshine.  Energy efficiency can still be achieved when they are installed in sunny areas by covering them with a layer of white liquid coating. This will also deliver additional protection.

 

Is Rubber Roofing Durable Enough for Atlanta Weather?

The weather in Atlanta is very important to consider when you’re looking to choose the best commercial roofing material for your building. Local temperatures are rarely if ever freezing, the weather is mostly calm and sunny, and the summer temperatures in Atlanta tend to be around 90 to 100 degrees most of the time.

As a result of these facts, the best type of roof you can get is one that performs well in hot weather and has good energy efficiency overall.

Commercial rubber roofing is highly durable and it is known to last for about 20-30 years – or even longer, if you can ensure proper maintenance and repair. It is also resistant to extreme weather conditions, UV rays, and other environmental factors that can cause damage to other roofing materials. Puncture damage, tears, and other forms of physical damage will typically not affect your average rubber roof too much. However, like any roofing material, it is important to regularly inspect and maintain the roof to ensure it stays in good condition and continues to provide optimal protection.

Superior Commercial Roofing & Contracting

Considering that its weatherproof qualities will not be needed as much, rubber roofing could outlast many other lower quality roofing materials, while its UV resistance and energy efficient properties will likely ensure that your Atlanta building will be adequately protected. To learn more about the qualities of rubber roofs, make sure you call on local Atlanta roofing professionals at Superior Commercial Roofing & Contracting.