Call Now!
Superior Commercial Contracting roofing and restoration services

Which Types of Rubber Roofing Do Experts Recommend the Most?

Rubber roofing can represent a good alternative for asphalt shingles. Moreover, you can add a protective layer over your already existing roof. There are three main types of rubber roofing systems, including EPDM, PVC, TPO or rubber shingles.

The total costs for rubber roofing may depend on several factors, including the thickness of the rubber, if it is fully adhered or mechanically fastened, or in case ballast is also used. Top rubber roofing Atlanta specialists confirm that the costs are also influenced by the necessity to remove the already existing roof layers and if decking or insulating are required during the installation of your rubber roofing system.

EPDM, namely ethylene propylene diene terpolymer is a synthetic rubber material which is preferred by many homeowners due to the fact that it can be easily installed by using just one sheet, as opposed to other systems which require the installation of several different layers.

TPO is highly recommended in hot climates, because it can reduce energy costs. As compared to EPDM though, TPO requires more time and skills, and therefore the labor costs also tend to be higher than in the case of EPDM. But TPO is available in different colors. PVC is another good example of rubber roofing system which can be found in various colors.

Related Posts

How a Metal Roof Can Withstand Rust Over Time – Advice from an Atlanta Roofer

metal roofing Atlanta

Metal is one of the most used materials for covering roofs, and the roof represents an essential element of any building, as it defines and completes it, but also provides protection from the elements.

A metal roof can last more than 50 years, preserving its structure, shape and beautiful aesthetic appearance, if the recommendations on proper installation, exploitation and maintenance are taken into account.  Avoiding rust is one of the main purposes of these recommendations, since rust is the biggest enemy of metal.

A metal roof can withstand rust over time if it is carefully and periodically cleaned by leading metal roofing Atlanta specialists, Unnecessary traffic must be avoided, to prevent scratches on the protective coat of paint. If, however, the damage has been done, the paint layer must be restored as quickly as possible, before water and moisture begin the corrosive process.

These are not operations to do on your own. It may not seem like a big deal to add a new layer of paint on some areas of your roof, but nothing is as simple as it seems, when it comes to a roof, and the risks of doing more harm than good, if you are not a roofing specialist, are very high and not worth assuming them.

 

Read More

Why Flat Roofing Is the Type of Roofing Most Atlanta Businesses Tend to Choose?

Atlanta commercial roofing contractor

Although, in the past, the best type of roof was considered to be the pitched roof, nowadays, flat roofs have become much more popular and not only when it comes to commercial or industrial buildings.

A full service Atlanta commercial roofing contractor confirms that the advantages of flat roofs make them very suitable for Atlanta climate, as well as for the needs of local business owners:

  • modern and aesthetic look
  • moderate construction costs
  • low maintenance costs
  • stability of the microclimate in the indoor space below the roof by preventing heat loss in winter and overheating in summer
  • reduced vulnerability to wind and hail
  • potential for a high ecological contribution
  • better use of the space inside the building
  • the possibility to use the roof for various purposes (installation of photovoltaic panels, arrangement of a green terrace, etc.)

The execution of a flat roof is demanding, especially when it comes to waterproofing. It is also essential to plan and execute the drainage system well and to ensure an impeccable vapor barrier to prevent excessive moisture build-up.

Proper waterproofing of a flat roof provides very good protection against water infiltration and moisture. Nowadays, waterproofing membranes are very efficient, resistant to exposure, and very elastic, ensuring a very long lifespan. That is why flat roofs are the type most Atlanta businesses tend to use.

Read More

Atlanta Roofing Technologies – Is EPDM the Same as Rubber Roofing?

EPDM roofing Atlanta

Put shortly… yes and no. EPDM stands for Ethylene Propylene Diene Monomer, which is a type of synthetic rubber. On the other hand, rubber roofing is a broad term that can refer to any type of roofing material made from rubber. So, EPDM is a type of rubber roofing, but not all rubber roofing is EPDM.

EPDM roofing is popular due to its durability, weather resistance, and energy efficiency. A highly skilled EPDM roofing Atlanta company confirm that it is commonly used on flat roofs and can last up to 50 years with proper maintenance. It is also easy to install and can be a cost-effective solution in the long run.

Rubber roofing, on the other hand, can refer to a variety of materials, including EPDM, but also TPO and PVC, for instance. It is important to note that not all rubber roofing options have the same durability and weather resistance as EPDM roofing. PVC and TPO have their unique characteristics, such as being highly resistant to UV radiation and chemical exposure, which makes them popular in commercial roofing applications. However, they may not be as flexible as EPDM and can be more expensive.

If you are considering getting a new roof or replacing an existing one, it is important to consult with a professional roofing contractor in Atlanta to help you understand the best roofing options for your needs and budget.

Read More